• Precision Alumina Ceramic Piston Rod,Ceramic Piston Rod – Custom Alumina Components | CERAMPRO
  • Precision Alumina Ceramic Piston Rod,Ceramic Piston Rod – Custom Alumina Components | CERAMPRO

Precision Alumina Ceramic Piston Rod

Place of Origin:Dongguan, Guangdong, China.

Material Introduction:Product Material: 95%–99.8% high-purity alumina ceramic (Al₂O₃), with optional ceramic-to-metal assembly using stainless steel adapters.

Functional Features:Wear-resistant ceramic piston rod with precision-ground and polished surfaces. Dimensions, tolerances and end features are customized to customer drawings.

Application Industries:Metering pump plungers, high-pressure water cleaners, chemical injection pumps, medical dosing systems, food and beverage filling equipment, laboratory liquid handling, and linear actuators. Explore our ceramic pump components.

Delivery Time:Lead time is confirmed after reviewing drawings, material specifications, order quantity and inspection requirements.

  • Precision Alumina Ceramic Piston Rod,Ceramic Piston Rod – Custom Alumina Components | CERAMPRO

Description

Product Description

This ceramic piston rod is made from 95%–99.8% alumina ceramic for pump assemblies, dosing equipment, filling systems and precision machinery. Its hard working surface helps reduce wear in repeated sliding contact and can offer corrosion resistance in compatible fluids. Each rod is made to customer drawings, including the diameter, length, end features and surface finish needed for the assembly. Material grade is selected to suit the operating conditions.

Material System

Alumina grades from 95% to 99.8% Al₂O₃ are available. The right choice depends on the liquid being handled, operating temperature, mechanical loads and budget. A higher-purity grade is not necessarily the best option for every design.

We can also supply ceramic-to-metal assemblies with stainless steel adapters where the mounting design requires them. For more information, see our alumina ceramic materials.

Application Scenarios

  • Metering and chemical injection pumps: Drawing-based rod components for reciprocating mechanisms.
  • High-pressure water cleaners: Ceramic parts for pump assemblies, selected according to the pressure, mounting arrangement and loading conditions.
  • Medical dosing and laboratory equipment: Rods for dispensing and liquid-handling mechanisms, with fluid compatibility and cleaning requirements specified for the project.
  • Food and beverage filling: Custom components for filling equipment. Any food-contact requirements should be stated before selecting the material.
  • Linear actuators and precision machinery: Rods used where wear resistance or electrical insulation is needed.

See our ceramic pump components for other parts used in fluid-handling equipment.

Core Advantages

  • Made to fit your design: We review straight and stepped rods, chamfers, threads and connection features against the assembly drawing.
  • Working surfaces finished to specification: Grinding and polishing requirements can be defined separately for contact surfaces, mounting areas and rod ends.
  • Care with longer rods: Diameter and straightness are considered together to help the rod run in line with its mating parts.
  • Inspection focused on critical features: Measurements follow the approved drawing, with reports available for agreed dimensions and surface requirements.

Technical Specifications

The following figures are for reference. Material properties vary by grade and test method. Machining requirements are reviewed against the rod’s diameter, length and shape before production.

Parameter Reference Value Notes
Material Purity 95%–99.8% Al₂O₃ Grade selected for the application.
Vickers Hardness 18–22 GPa, subject to grade verification The applicable value and test conditions must be confirmed from the material data.
Surface Finish (Ra) ≤0.1 μm on specified working surfaces, subject to review Applies to the surfaces identified on the drawing.
Diameter Tolerance ±0.002 mm, subject to size and geometry review Fit clearance and form tolerances are specified separately.
Straightness ≤0.01 mm over 100 mm, subject to review The measurement length and inspection conditions are agreed before production.
Compressive Strength >2100 MPa, subject to grade verification This is a material property, not a working pressure rating for the rod or pump.

Material Comparison

Alumina, zirconia and stainless steel suit different designs. Wear is one consideration, but impact, side loads and connection details also matter.

Selection Factor Alumina Ceramic Zirconia Ceramic Stainless Steel
Wear Resistance Hard surface for many sliding and abrasive applications Wear-resistant, with higher fracture toughness than typical alumina grades Depends on the alloy, surface treatment and lubrication
Impact and Side Loads Needs good alignment and protection from impact An option when greater ceramic toughness is needed Generally more tolerant of impact and deformation
Electrical Properties Electrically insulating Common structural grades are electrically insulating Electrically conductive
Mounting and Connections Mounting details should avoid concentrated stress Connection geometry still needs careful review More options for conventional threaded and welded connections

For an alternative material, view our zirconia ceramic piston and plunger assemblies. Fluid compatibility should be checked at the actual concentration and operating temperature.

FAQ

1. What do you need to quote a custom ceramic piston rod?

Please send your drawing and quantity, along with the working medium and temperature. Mark any critical tolerances, surface finishes and connection details so we can review them before quoting.

2. Can you work from a sample?

Yes. We can review a sample and confirm the dimensions with you. If the sample is worn, the original working dimensions and fit requirements need to be established before production.

3. Can an alumina piston rod have threads or stainless steel adapters?

Yes, depending on the design. We review the thread profile, ceramic wall thickness, connection method and loads to determine a suitable manufacturing approach.

4. Is ±0.002 mm diameter tolerance the same as a 2 μm clearance?

No. Diameter tolerance applies to one part. Clearance depends on the dimensions of both mating parts, so it needs to be specified separately.

5. Is a ceramic piston rod the same as a ceramic plunger?

Not always. A piston rod usually transfers motion to a piston. A plunger moves through a sealing arrangement to displace liquid. We use the assembly drawing and intended function to confirm the correct part description.

6. Can you provide an inspection report?

Yes. Tell us which dimensions and surface characteristics you need recorded. We agree on the inspection scope and report requirements before production.

7. What should we watch for during installation?

Keep the alumina ceramic piston rod aligned with the assembly. Avoid impact, excessive clamping force and side loading, and follow the mounting and clearance requirements in the equipment design.

Customizable

Custom Solutions Center We have a wide range of technologies such as material technology, process technology, design technology, measurement/evaluation technology, and integrated processes from materials to products in-house, so we can respond to various customizations. Please feel free to contact us first
Leave a message
Name *
Email *
Phone *
Message *
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.