Precision Honing & Fit Checks

A ceramic plunger can meet its dimensional tolerances and still bind inside the sleeve. During honing, we use an air gauge to monitor the sleeve bore and adjust the process based on the readings. After grinding and honing, we check the plunger diameter, sleeve bore, and roundness, then match the parts using the measured dimensions.Once assembled, we check how the plunger moves inside its matching sleeve. Under consistent test conditions, it should descend slowly and smoothly, without dropping suddenly or sticking. This gives us a practical check of the fit alongside the dimensional measurements.
About US
Precision Honing & Fit Checks

One-Stop Custom Ceramic Manufacturing Process

1. Engineering Drawing Analysis (DFM):We review customer technical drawings and optimize product structure to enhance manufacturability, precision tolerance control and overall cost-effectiveness.
2. Material Selection Consultation:We recommend optimal ceramic grades based on your requirements for wear resistance, corrosion resistance, pressure endurance, temperature resistance and sealing performance.
3. Prototype Validation:Custom sample production and functional performance testing are available prior to full mass production.
4. Flexible Production Capacity:We accommodate small-batch trial orders and large-scale mass production to match your actual demand.
5 .Quality Inspection:All critical dimensions, sealing surfaces, inner diameters, outer diameters and key tolerances are strictly inspected before delivery..
6 .Global Delivery Support:We provide professional secure packaging and export-standard shipping services for worldwide customers.

Get Your Quote Today

Ceramic Pistons & Plungers

Ceramic Pump Sleeve

Ceramic Pump Piston

Ceramic Pump Valve

Ceramic Pump Bushing

Material Introduction This high-pressure pump ceramic piston and plunger is mainly made from zirconia ceramic, alumina ceramic or ZTA ceramic, depending on the pressure level, fluid medium and working conditions. Zirconia ceramic is often preferred for high-pressure pump applications because it offers good toughness, wear resistance and stable performance during repeated plunger movement. Functional Features Good wear resistance for high-pressure pump operation Corrosion resistance in fluid and chemical environments Precision-ground and polished surface for smoother movement Stable dimensions for piston and plunger assembly Custom diameter, length, tolerance and surface finish available Suitable for OEM ceramic pump and fluid control components Application Industries This ceramic piston and plunger is commonly used in ceramic pump components, high-pressure pumps, metering pumps, chemical pumps, industrial cleaning pumps, water treatment systems, fluid control equipment and precision machinery. Delivery Time Lead time is confirmed after reviewing your drawings, material specifications, tolerances, order quantity and inspection requirements.Please contact us with your project details for a production and delivery schedule.
Material IntroductionThis valve core and sleeve is made from high-performance zirconia ceramic (ZrO₂), a material valued for its hardness, wear resistance, corrosion resistance, and stable performance in clean fluid environments. It is well suited for pharmaceutical liquids, solvents, and precision fluid control applications. Functional Features     Precision-polished sealing surface for more stable sealing performance     Controlled tolerances to support accurate matching between the valve core and sleeve     Good wear and corrosion resistance for long-term pump operation      Custom holes, grooves, chamfers, and special structures available based on drawingsThis component is commonly used as part of ceramic pump components and ceramic valve components for dosing, filling, and precision liquid control systems. Application Industries    Pharmaceutical metering pumps    Dosing and filling systems    Medical fluid control equipment    Biotechnology equipment    Fine chemical processing systems    Laboratory liquid handling equipment Delivery Time    Standard specifications: about 15–25 days    Customized specifications: about 20–35 days    Complex or high-precision parts: evaluated according to drawingsFor custom zirconia ceramic valve core and sleeve manufacturing, please contact CERAMPRO with your drawings, tolerance requirements, surface finish requirements, application details, and estimated order quantity.
Place of Origin:Guangdong, China Product Material:High-purity alumina ceramic (Al₂O₃ ≥99.6%). Monolithic alumina is used for pump liners and valve seats. For reciprocating plungers, piston rods, or components requiring higher impact resistance, zirconia-toughened alumina (ZTA) can be used to improve toughness. Explore our alumina ceramic components. Functional Features:These ceramic metering pump components provide high hardness, wear resistance, chemical stability, low contamination, smooth sliding surfaces, and precise mating clearances. Available parts include ceramic plungers, sleeves, pistons, pump cylinders, and valve seats. View more ceramic pump components. Application Fields:Precision chemical dosing; semiconductor wet-process equipment; pharmaceutical and laboratory fluid handling; water-treatment dosing systems; industrial dispensing equipment; battery electrolyte preparation; corrosive-fluid metering systems. Global OEM Supply:Serving OEM customers in the USA, Germany, Japan, and Europe. Delivery Period:Standard plunger/sleeve components: 40–65 days,Complex integrated valve bodies, ultra-thin diaphragms, or matched component sets: 70–120 days
Product Name:Zirconia Ceramic Filling Pump Fluid Control Structural Components Product Material:Yttria-Stabilized Tetragonal Zirconia Ceramic (Y-TZP). For areas requiring extreme wear/corrosion resistance or higher thermal conductivity, Zirconia-Silicon Carbide (ZrO₂-SiC) or Zirconia-Aluminum Nitride (ZrO₂-AlN) composite ceramics can be utilized. Material Characteristics:Exceptional fracture toughness (impact resistant, K₁c: 8-12 MPa·m¹ᐟ²), Ultra-high hardness (HV >1200) and extremely low wear rate, Superior chemical corrosion resistance (tolerant to strong acids, alkalis, organic solvents, and Li-ion battery electrolytes), Extremely low metal ion leaching and zero magnetic properties, Good biocompatibility and food safety, Moderate coefficient of thermal expansion (~10×10⁻⁶/K) compatible with various metals, Capable of achieving nano-level ultra-smooth surfaces (Ra < 0.02 µm) to reduce flow resistance and adhesion, High mechanical and flexural strength (>1000 MPa). Application Fields:Pump bodies, chambers, pistons/plungers, valve seats, valve cores, diaphragms, and fluid manifold plates for high-precision filling pumps; Quantitative filling and transfer of lithium battery electrolytes and electrode slurries; Sterile filling of high-value pharmaceuticals and protein preparations in biopharmaceuticals; Precise dispensing of high-purity chemicals in the semiconductor industry; Micro-dosing filling of high-end cosmetics and fragrances. Application Industries:New Energy (Lithium battery manufacturing equipment), Biomedical (Pharmaceuticals, high-end medical devices), Fluid Control (Precision metering and filling), Semiconductor Manufacturing, Advanced Mechanical Equipment. Processing Difficulties:Machining pump bodies and manifolds with complex 3D internal flow channels, high aspect ratio holes, and irregular curved surfaces; Ensuring ultra-high straightness and roundness of pistons/plungers and achieving micron-level dynamic clearance with pump chambers; Achieving nano-level flatness and super-mirror finish on large-area sealing planes (e.g., valve seats); Controlling deformation and stress concentration in thin-walled, multi-cavity structures during sintering and machining; Guaranteeing all flow channels and contact surfaces are free from machining defects to prevent media retention or contamination. Processing Flow:Formulation of high-purity nano-zirconia powder and slurry homogenization → Precision Ceramic Injection Molding (CIM) of complex structural green bodies → Catalytic debinding and staged presintering → High-temperature atmosphere-controlled sintering (HIP optional) for densification → Rough machining and datum establishment using high-rigidity CNC machines → Ultra-precision slow wire cutting/grinding of core flow channels and mating surfaces → Ultrasonic-assisted precision drilling and polishing → Multi-step Chemical Mechanical Polishing (CMP) to achieve ultra-smooth functional surfaces → Full dimensional inspection via Coordinate Measuring Machine (CMM) → Surface cleanliness and ion leaching analysis → Performance simulation testing (flow, pressure) → Vacuum packaging in a class 1000 cleanroom Delivery Period:Standard piston/valve seat components: 55-85 daysComplex integrated pump bodies, manifolds, or multi-component成套 solutions: 90-150 days
Place of Origin:Dongguan, Guangdong, China Material Introduction:The ceramic components of this alumina ceramic metering pump can be made from high-purity alumina (99.5%–99.8% Al2O3). Zirconia-toughened alumina (ZTA) can also be considered for parts subject to wear or impact, such as valve seats and valve cores. The metal components are made from stainless steel. Ceramic and stainless steel grades are selected according to customer drawings and operating conditions. Functional Features:The high-purity alumina components in this precision metering pump offer high hardness (Mohs 9), wear resistance, and dimensional stability. Sliding and sealing surfaces are finished to the specified roughness. Chemical compatibility is assessed for the intended liquid and operating conditions. CERAMPRO builds complete pumps to customer drawings. The ceramic components shown in the product photos can also be ordered separately. View Metering Pump Core Components Application Industries:This industrial dosing pump can be configured for fluid control (precision chemical processing, water treatment, and food and beverage production), petrochemical processing (catalyst dosing and corrosive liquid transfer), biomedical applications (pharmaceutical liquid metering and in vitro diagnostic reagent handling), new energy (precision dosing of lithium-ion battery electrolytes), and semiconductor manufacturing (delivery of ultrapure process chemicals). Explore Ceramic Pump Components Global OEM Supply:Serving OEM customers in the USA, Germany, Japan, and Europe. Lead Time:Lead time is confirmed after reviewing the drawings, material requirements, pump configuration, and order quantity.
Place of Origin:Guangdong, China Material IntroductionThis zirconia ceramic plunger is made from yttria-stabilized zirconia (Y-TZP), offering good strength, toughness and wear resistance for precision fluid control. Learn more about our Zirconia Ceramics. Functional Features Precision-ground and polished working surfaces for smooth reciprocating movement. Diameter, roundness and surface roughness controlled to suit the mating sleeve or seal. Custom zirconia plunger designs with steps, grooves, side holes and different end profiles. Critical working dimensions inspected against the approved drawing. Application IndustriesSuitable for liquid dosing, pharmaceutical filling, chemical handling and laboratory equipment. For ceramic metering pump plunger applications, we review the working diameter, stroke and mating clearance to suit the assembly. Explore related Ceramic Pump Components. Global OEM SupplyServing OEM customers in the USA, Germany, Japan, and Europe. As a ceramic plunger manufacturer, CERAMPRO supports drawing-based production from sample evaluation to repeat batch orders. Delivery Time:Lead time is confirmed based on drawings, tolerances and order quantity.
Product Name:Custom Machining Service for Alumina Ceramic Metering Pump Critical Components Product Material:High-Purity Alumina Ceramic (Al₂O₃ 96%-99.9%). Depending on the specific stress, impact, and wear resistance requirements of the components, customized solutions using composite materials like Zirconia Toughened Alumina (ZTA) or full-component customization with materials such as high-purity Yttria-Stabilized Zirconia (Y-TZP) are available. Material Characteristics:Exceptional wear resistance and high hardness (Mohs hardness 9), Excellent chemical corrosion resistance (resistant to strong acids, alkalis, solvents, and salts), High rigidity and outstanding dimensional stability, Good electrical insulation and dielectric strength, Extremely low risk of media adsorption and contamination, Surfaces can achieve various finish levels from matte to mirror (Ra < 0.05 µm), High biocompatibility and material purity. Application Fields:Custom machining of metering pump core moving parts (ceramic plungers/pistons, piston rods), precision mating parts (pump cylinders/sleeves, valve balls, valve seats), static structural components (pump bodies, end covers, diaphragms), and special fluid channel components. Application Industries:Fluid Control (Precision chemical processing, water treatment), Biomedical (Pharmaceuticals, in-vitro diagnostic equipment), New Energy (Lithium battery electrolyte preparation and transfer), Petrochemical (Precise dosing of catalysts and additives), Semiconductor Manufacturing (High-purity chemical distribution), Advanced Mechanical Equipment (Precision dispensing, spraying). Processing Difficulties:Reverse engineering and personalized design based on customer's fluid properties, pressure profiles, and life expectancy requirements; Machining plungers/pistons with special length-to-diameter ratios, complex stepped or irregular profiles; Processing high-precision deep holes (pump cylinders) and controlling micron-level dynamic fit tolerances with moving parts; Ensuring cumulative accuracy in multi-component assembly to guarantee overall pump performance; Meeting requirements for special surface treatments (e.g., specific roughness, hydrophilic/hydrophobic coatings). Processing Flow:Customer requirement analysis and technical liaison → Collaborative design (including fluid simulation and stress analysis) → Material selection and powder preparation → Near-net-shape forming (dry pressing, isostatic pressing, injection molding) → Customized sintering process development and implementation → Precision CNC rough machining → Ultra-precision grinding/lapping to design dimensions → Paired machining and selection using dedicated tooling → Customized surface treatment and post-processing → Full dimensional inspection and performance testing (flow, pressure, life simulation) → Cleaning, packaging, and document delivery (including inspection reports, installation guidelines) Delivery Period:Simple custom parts based on existing drawings: 35-60 daysComplex custom projects requiring co-design, mold development, or process validation: 70-120 days (Specific timeline to be determined per technical agreement)
Material Introduction This PEEK + zirconia ceramic liquid crystal injection pump is designed for precision dispensing, micro-dosing and clean fluid control. The PEEK body provides chemical resistance and low-friction performance, while zirconia ceramic contact parts offer wear resistance and a smooth working surface. View more related products in our Ceramic Pump Components category. Functional Features PEEK + zirconia ceramic composite structure Good chemical resistance for clean fluid handling Low-friction movement for precision injection Zirconia ceramic contact parts for better wear resistance Custom machining and assembly based on drawings Application Industries Liquid crystal injection and dispensing equipment Precision chemical dosing systems Laboratory fluid control instruments Pharmaceutical preparation equipment Medical device fluid control systems For high-pressure ceramic pump plungers, please refer to our High-Pressure Pump Ceramic Piston / Plunger. Delivery Time Standard samples usually take 30–35 days after drawing confirmation. Customized PEEK + zirconia ceramic pump structures usually take 35–50 days, depending on machining difficulty and quantity.
Material IntroductionThis silicon carbide ceramic sleeve is made from high-performance silicon carbide ceramic (SiC), with material options such as SSiC, RBSiC / SiSiC, and NSiC. It is suitable for applications that require wear resistance, corrosion resistance, and stable performance under abrasive or high-temperature conditions. Functional Features High hardness and wear resistance for abrasive media Good corrosion resistance for chemical and slurry applications High thermal conductivity and good thermal stability Precision-ground ID and OD for pump sleeves, bushings, and bearing parts Custom size, grooves, chamfers, holes, and sealing surfaces based on drawings For tight tolerance or special surface requirements, CERAMPRO provides precision ceramic machining, grinding, polishing, and inspection support. Application Industries Mechanical seals and seal rings Magnetic pump bearings and sleeves Slurry pump bushings and wear sleeves Sand mill liners and grinding equipment Chemical processing and corrosive fluid handling New energy, semiconductor, and high-temperature equipment Delivery Time Standard silicon carbide ceramic sleeves: about 20–35 days Large or complex custom sleeves: about 40–60 days High-precision parts: evaluated according to drawings Please share your drawings, tolerance requirements, surface finish, working media, and estimated order quantity for a custom SiC ceramic sleeve quotation.
Place of Origin:  Guangdong, China Material Introduction: This sleeve piston is made from wear-resistant alumina ceramic. It is designed for high-precision filling pump applications where smooth sliding, stable dimensions, and chemical resistance are required. Alumina ceramic is suitable for pump parts that need reliable performance during repeated liquid or paste filling operations. Key Features: Good hardness, wear resistance, corrosion resistance, smooth piston movement, stable matching accuracy, and low contamination risk. Compared with many metal pump parts, the ceramic sleeve piston helps reduce sliding wear and is suitable for custom ceramic pump components used in clean fluid handling systems. Applications: High-precision filling pumps, liquid filling machines, paste filling pumps, cosmetic filling equipment, pharmaceutical filling systems, liquid and paste filling systems, and customized alumina ceramic sleeve piston assemblies. Lead Time: Lead time depends on drawings, sample structure, dimensions, tolerance requirements, surface finish, material grade, and order quantity. For custom sleeve piston designs, please contact us for technical evaluation.
Place of Origin:  Guangdong, China Material Introduction: This piston and sleeve set is made from high-performance zirconia ceramic (ZrO₂). It is designed for battery electrolyte injection pumps where wear resistance, corrosion resistance, and smooth sliding performance are important. Key Features: High hardness, low wear, good chemical resistance, precise piston-to-sleeve fit, smooth movement, and stable performance during repeated dosing operations. The ceramic structure helps improve service life compared with many metal pump parts. Applications: Lithium battery electrolyte injection equipment, battery cell filling systems, precision dosing pumps, electrolyte filling pumps, automated fluid control modules, and custom ceramic pump components. Lead Time: Lead time depends on drawings, sample structure, dimensions, tolerance requirements, surface finish, material grade, and order quantity. For custom piston and sleeve designs, please contact us for technical evaluation.
Place of Origin:  Guangdong, China Material Introduction: This ceramic plunger sleeve is made from wear-resistant alumina ceramic. It is designed for high-pressure washer pump heads where stable sliding performance, good hardness, corrosion resistance, and long service life are required during repeated water-pressure operation. Key Features: Smooth surface finish, high wear resistance, stable dimensions, good sliding performance, and reliable replacement use for cleaning pump systems. Compared with many metal sleeves, this ceramic plunger sleeve helps reduce wear inside pressure washer pump heads and supports more stable pump operation. Applications: High pressure washer pumps, car wash pump accessories, pressure washer pump heads, cleaning equipment pump repair parts, ceramic plunger sleeve replacement parts, and customized ceramic pump components for high-pressure water systems. Lead Time: Lead time depends on drawings, samples, outer diameter, inner bore size, sleeve length, surface finish, tolerance requirements, material grade, and order quantity. For custom ceramic plunger sleeve production, please contact us for technical evaluation.
Material IntroductionMain Material: Zirconia Ceramic (ZrO₂)Optional Material: Alumina Ceramic (Al₂O₃) upon request.Zirconia ceramic is commonly used for precision pump sleeves and piston components where wear resistance,corrosion resistance, and stable dimensional accuracy are important. In metering pump applications, it helpsreduce friction, support smooth movement, and maintain stable operation over time Functional FeaturesWear Resistance:Helps reduce wear during repeated piston movement and pump operation.Corrosion Resistance:Suitable for clean, chemical, and mildly corrosive fluid environments.Precision Bore Control:Inner and outer diameters can be ground according to drawing requirements.Smooth Surface:Polished surfaces help reduce friction and support stable movement.Dimensional Stability:Maintains stable dimensions after sintering and precision grinding.Custom Manufacturing:Available based on customer drawings, samples, or assembly requirements.Application IndustriesMetering Pumps · Dosing Systems · Filling EquipmentFluid Control Systems · Chemical Pump Components · Clean Processing EquipmentLead TimeCustom Production: 35 days, depending on drawing complexity and order quantityService: OEM/ODM manufacturing based on drawings or samples
Place of Origin:Guangdong, China Product Material: Yttria-stabilized Zirconia ($Y-PSZ/Y-TZP$), Optional: Magnesia-stabilized Zirconia ($Mg-PSZ$) for high-temperature stability, Ceramic-to-Metal bonded assemblies Material Characteristics:High fracture toughness, mechanical strength, hardness, wear resistance, corrosion resistance, and dimensional stability. Its thermal expansion behavior supports integration with selected metal structures, while precision polishing provides a smooth, low-friction working surface. Application Fields: Precision filling equipment, High-pressure homogenizers, Lithium battery slurry pumps, Medical dosing pumps, Chemical metering systems, High-end ceramic valves, Aerospace fuel control systems Application Industries: Biomedical (Pharmaceutical filling), Advanced Machinery (Heavy-duty precision equipment), New Energy (Battery manufacturing), Fluid Control (Micro-fluidics), Electronic Engineering (Chemical delivery), Aerospace (Actuator components), Petrochemical (Corrosive media handling), Broad Semiconductor (CMP slurry pumping) Processing Difficulties: Achieving sub-micron dimensional tolerances (±0.001mm), Mastering the precision polishing of Zirconia to achieve a defect-free mirror surface, Managing the phase transformation toughening during high-speed grinding, Controlling the concentricity of composite ceramic-metal designs Processing Flow: Nano-grade Zirconia powder preparation → Cold Isostatic Pressing (CIP) → High-temperature sintering (1500°C+) → Precision diamond cylindrical grinding → Step-by-step mirror polishing → Ultrasonic flaw detection → CMM 3D dimensional inspection → Dynamic balance testing (if required) → Secure packaging Delivery Period: Standard specifications: 25-35 days,
Place of Origin:Dongguan, Guangdong, China. Material Introduction:Product Material: 95%–99.8% high-purity alumina ceramic (Al₂O₃), with optional ceramic-to-metal assembly using stainless steel adapters. Functional Features:Wear-resistant ceramic piston rod with precision-ground and polished surfaces. Dimensions, tolerances and end features are customized to customer drawings. Application Industries:Metering pump plungers, high-pressure water cleaners, chemical injection pumps, medical dosing systems, food and beverage filling equipment, laboratory liquid handling, and linear actuators. Explore our ceramic pump components. Delivery Time:Lead time is confirmed after reviewing drawings, material specifications, order quantity and inspection requirements.
Material Introduction This high-purity alumina ceramic plunger is made from 95%–99.7% Al₂O₃ ceramic and is mainly used in metering pumps, dosing systems and precision fluid control equipment. It offers good wear resistance, chemical stability and a smooth working surface for long-term pump operation. View more related products in our Ceramic Pump Components category. Functional Features High hardness and good wear resistance Stable performance in chemical and water-based media Polished surface for sealing and sliding contact Custom OD, length, hole position and end structure available For higher-pressure applications, please see our High-Pressure Pump Ceramic Piston / Plunger. Application Industries Chemical metering pumps Water treatment dosing systems Filling and dispensing equipment Pharmaceutical liquid dosing equipment Laboratory fluid control systems Delivery Time Standard samples usually take 20–35 days after drawing confirmation. Customized sizes, polished surfaces or special structures usually take 35–50 days. You can send us your drawing for a quick review and quotation.
Place of Origin:Guangdong, China Material Introduction:Made from 95%–99.7% high-purity alumina ceramic (Al₂O₃). Titanium alloy or stainless-steel shaft extensions and metal connection parts are available when required by the assembly design. Functional Features:Provides good wear resistance, corrosion resistance in water-based environments, and dimensional stability. Precision-ground or polished surfaces help reduce friction and maintain a stable fit between the piston and pump body. Diameter, length, bore structure, end geometry, tolerance, and surface finish can be customized according to customer drawings. Application Industries:Suitable for reverse osmosis water purification equipment, aquarium circulation pumps, desktop water dispensers, beverage vending equipment, small appliance pumps, hydrotherapy equipment, dishwasher drainage pumps, and compact cooling circulation systems. View more ceramic pump components. Global OEM Supply:Serving OEM customers in the USA, Germany, Japan, and Europe. Lead Time:Standard specifications usually require 15–30 days. Custom dimensions, special bores, or non-standard piston designs usually require 35–50 days. The final lead time depends on material grade, dimensions, tolerances, surface finish, inspection requirements, and order quantity.
Product Name: Precision Plug Piston Ceramic Rod Product Material: High-purity Alumina ($Al_2O_3$), Yttria-stabilized Zirconia ($ZrO_2$), or Silicon Nitride ($Si_3N_4$). (Customizable based on wear and temperature requirements). Material Characteristics: Extreme hardness and wear resistance, Mirror-like surface finish (Ra < 0.1μm), High mechanical strength and fracture toughness (especially Zirconia), Excellent chemical corrosion resistance, Superior electrical insulation, Low thermal expansion, Zero porosity. Application Fields: Precision metering pumps, Ceramic plunger valves, High-pressure fluid dispensers, Electronic connector insulation pins, Biomedical sampling probes, Fuel injection systems, Vacuum interrupters. Application Industries: Biomedical (Liquid medicine dosing), Advanced Machinery (High-pressure plungers), New Energy (Lithium battery slurry pumping), Fluid Control (Micro-dispensing), Electronic Engineering (High-frequency plugs), Aerospace (Hydraulic actuators), Petrochemical (Corrosive fluid handling), Broad Semiconductor (Precision positioning). Processing Difficulties: Maintaining ultra-precise dimensional tolerances (±0.001mm), Achieving mirror-finish polishing to reduce friction coefficients, Controlling coaxiality and cylindricity of long-thin rods, Preventing micro-chipping during diamond grinding of hard ceramic surfaces. Processing Flow: Raw material preparation → Isostatic pressing or Ceramic injection molding (CIM) → High-temperature sintering → Precision diamond grinding → Micro-polishing (Mirror finish) → Ultrasonic cleaning → CMM dimensional inspection → Surface roughness testing → Secure packaging. Delivery Period: Standard rod sizes: 15-25 days, Custom complex geometries/high-precision orders: 30-50 days.
Product Name: Biomedical Zirconia Ceramic Piston Pump Product Material: Medical-Grade Zirconia (ZrO₂) Stabilized with Yttria (Y₂O₃), Biocompatible Additives Material Characteristics:High hardness (HV ~1200), biocompatible (ISO 10993), wear/corrosion-resistant, low friction (μ 6.0 g/cm³), sterilization-compatible Application Fields:Drug delivery systems, minimally invasive surgical devices, implantable pumps, laboratory fluid handling, prosthetic joints Application Industries:Medical devices, pharmaceuticals, biotechnology, veterinary medicine Processing Difficulties: Achieving ultra-smooth surfaces (Ra ≤0.03 μm) for fluid compatibility Maintaining biocompatibility during high-temperature sintering Precision machining of micro-channels (≤0.1mm diameter) Avoiding cracks in thin-walled piston designs (
Product Name: Fine Structure Zirconia Ceramic Piston Product Material: Yttria-Stabilized Zirconia (Y-TZP) Material Characteristics: High toughness, high hardness, excellent wear resistance, low friction coefficient, excellent electrical insulation, corrosion resistance Application Fields: High-precision metering pumps, high-pressure compressors, fuel injection systems, precision instruments, medical injection equipment Application Industries: Medical equipment, automotive industry, analytical instruments, precision chemical industry, semiconductor manufacturing Processing Difficulties: Sintering shrinkage rate control, precise processing of super-hard materials, high surface finish requirements Processing Flow: Powder Preparation → Granulation → Forming → Pre-Sintering → CNC Precision Grinding → Heat Treatment → Inspection and Packaging Delivery Time: Standard parts 30-45 days, custom parts 50-65 days
Place of Origin: Guangdong, China Materials:Made from high-performance zirconia ceramic, mainly Y-TZP zirconia, offering high toughness, wear resistance, corrosion resistance, and a smooth sealing surface for demanding fluid control applications. Key Features:This zirconia ceramic diverter valve core and seat are designed for precise sealing, low friction, long service life, and stable performance in high-purity, corrosive, or abrasive media. As part of our ceramic valve components range, it can be customized based on drawings, samples, flow channels, and sealing requirements. Applications:Suitable for semiconductor wet process equipment, biopharmaceutical systems, food and beverage fluid control, petrochemical valves, analytical instruments, and precision mechanical fluid control systems. Lead Time:Lead time is evaluated based on drawing complexity, material grade, machining difficulty, sealing tolerance, surface finish, and order quantity. CERAMPRO supports precision ceramic machining for custom valve cores and seats.
Product Name: High Precision Zirconia Ceramic Valve Sleeve Product Material: Yttrium-Stabilized Tetragonal Zirconia (Y-TZP) Material Characteristics: High fracture toughness, excellent wear resistance, ultra-low friction coefficient, strong corrosion resistance, high hardness, excellent dimensional stability Application Fields: Precision control valves, hydraulic transmission systems, chemical process equipment, high-performance pump body components, automatic control devices Application Industries: Petrochemicals, Machinery Equipment, Automation Control, Medical Devices, Energy and Power Processing Difficulties: Strength control of thin-walled structure, high-precision inner hole processing, strict shape and position tolerance guarantee, batch production consistency Processing Flow: Powder processing → Spray granulation → Forming (Dry Pressing/CIP) → High-temperature sintering → CNC precision processing → Inspection → Ultrasonic cleaning → Packaging Delivery Time: 28-35 days (special customization 45-55 days)
Material Introduction Made from high-purity alumina ceramic, this ceramic shaft plug and sleeve set is designed for wear-resistant and corrosion-resistant pump, valve and fluid control applications. Custom ID, OD, length, clearance fit and surface finish can be manufactured based on customer drawings. Functional Features High hardness for long-term wear resistance Good corrosion resistance in fluid and chemical environments Precision-ground ID and OD for stable assembly fit Smooth surface finish to help reduce friction and leakage risk Suitable for ceramic shaft sleeves, plug sleeves and matched ceramic assemblies Custom dimensions, tolerances and polishing options available Application Industries This alumina ceramic shaft plug and sleeve set is commonly used in ceramic pump components, valve assemblies, metering pumps, chemical pumps, fluid control systems, rotating shaft protection, automation equipment and precision machinery. It is suitable for working conditions where metal sleeves may face wear, corrosion, sticking or dimensional instability during long-term operation. Delivery Time Sample production usually takes 15–25 working days after drawings, material and tolerance requirements are confirmed. Bulk order lead time is usually 25–40 working days, depending on quantity, machining difficulty, polishing requirements and inspection standards.

1. What are ceramic pump components?

Ceramic pump components are precision ceramic parts used in pump and fluid control systems, including ceramic plungers, pistons, sleeves, valve cores, valve seats, seal rings and other wear-resistant pump parts. They are commonly used in high-pressure pumps, metering pumps, chemical pumps and dosing systems.

3. Which ceramic material is best for pump parts?

The best ceramic material depends on the working media, pressure, temperature, corrosion environment and service life requirements. Alumina ceramic is cost-effective for general wear applications, zirconia ceramic provides better toughness and impact resistance, while silicon carbide ceramic is suitable for harsh wear and corrosion environments.

4. Can ceramic pump parts be customized according to drawings?

Yes. CERAMPRO supports custom ceramic pump parts based on customer drawings, samples or application requirements. Custom options include ceramic plungers, pistons, sleeves, valve cores, valve seats, seal rings, inner and outer diameters, sealing surfaces and precision tolerances.

5.What information is needed for a ceramic pump component quotation?

For quotation, please provide drawings or samples, material requirements, dimensions, tolerances, quantity, working media, pressure, temperature and application environment. This information helps CERAMPRO evaluate material selection, machining feasibility and production cost.

6. Where are ceramic pump components commonly used?

Ceramic pump components are commonly used in high-pressure pumps, metering pumps, dosing pumps, chemical pumps, pharmaceutical pumps, food-grade fluid systems, water treatment equipment and other wear-resistant or corrosion-resistant fluid control applications.

Shipping & Handling of Ceramics

At CERAMPRO, we manufacture high-performance industrial ceramics, includingAlumina, Zirconia, Beryllium Oxide, Aluminium Nitride, Silicon Nitride, Boron Nitride, Silicon Carbide, and Boron Carbide . These materials feature extreme hardness, wear resistance, and precise dimensions. While some materials are inherently more brittle, our professional shipping solutions ensure safe delivery.

Packaging Details:
● Multi-layer cushioning:Each product is first wrapped with anti-static film, then surrounded by high-density foam, EPE pearl cotton, or custom inserts to prevent scratches and minor impacts. 
● Secure support structure:Fragile or precision ceramic parts are fixed using custom pallets, internal supports, or partitions to prevent shifting or collisions during transport.
● Sturdy outer carton:Outer packaging consists of reinforced corrugated boxes or wooden crates, providing pressure resistance, moisture protection, and shock absorption suitable for long-distance international shipping.
● Professional labeling:Each package is marked with “Fragile” and “This Side Up” signs to ensure careful handling throughout the logistics chain.

Shipping Assurance:
● Partnering with reliable international logistics companies for fully traceable shipments and timely delivery.
● Additional insurance is available for high-value or bulk orders, providing extra peace of mind.
Our professional packaging and shipping solutions minimize transport risks, ensuring every high-performance industrial ceramic product reaches our customers safely and intact.

Customizable

We have a wide range of technologies such as material technology, process technology, design technology, measurement/evaluation technology, and integrated processes from materials to products in-house, so we can respond to various customizations. Please feel free to contact us first.
Request Quote
Leave a message
Name *
Email *
Phone *
Message *
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.